Siemens and VSI Labs Co-Pilot Autonomous Vehicle Technology

Partnership leverages Siemens PAVE360 platform to create digital twin simulation for the validation and testing of VSI Labs Capability Demonstrator components.

Partnership leverages Siemens PAVE360 platform to create digital twin simulation for the validation and testing of VSI Labs Capability Demonstrator components.

Siemens PAVE 360 platform will be used to create digital twin simulations for validation and testing of VSI Labs Capability Demonstrator components. Image Courtesy of Siemens Digital Industries Software.

Given the vast complexity and scope of autonomous vehicle development, it’s going to take a village to get new, self-driving cars to market. VSI Labs, which already collaborates with a variety of leaders on its VSI Labs Capability Demonstrator, is striking yet another partnership, this time with Siemens Digital Industries Software to advance development using digital twins.

VSI Labs, which researches active safety and AV technologies, is partnering with Siemens, using its PAVE360 platform to create digital twin simulations for the validation and testing of all the processors, electronics, sensors, and systems that are powering the VSI Labs Capability Demonstrator. The latter is an advanced AV development vehicle equipped with components from best-in-class automotive technology leaders, including ARM for processors, NXP for the central compute platform, FLIR for thermal cameras, and Dataspeed for a by-wire control systems, among other functionalities.

“The Capability Demonstrator mirrors the behavior of VSI Labs’ physical vehicle so that corner cases can be tested that are too rare, too dangerous, or too difficult to test in actual driving conditions,” says David Frit, senior director, Autonomous and ADAS SoCs for Siemens.

The PAVE360 pre-silicon autonomous validation environments serves as a comprehensive platform for multi-supplier collaboration across the entire AV ecosystem. PAVE360 simulation capabilities go beyond processors to create digital twins that encompass everything from automotive hardware and software sub-systems, full vehicle models, and fusion of sensor data to traffic flows and the simulation of smart cities, which will eventually play host to AV traffic.

This high-fidelity twins are far more useful to on-going development compared to low-fidelity models and algorithms running on a PC farm, Frit claims. “It is well understood in engineering circles that assuming common behavior in a complex embedded environment often results in unexpected subtle, and deadly, situations that are difficult to find and debug in advance,” he explains. “High-fidelity digital twins such as those applied to PAVE360 do not exhibit substantially different behavior from the hardware … and therefore, complex validation scenarios can be performed with high confidence.”

Without PAVE360’s high-fidelity capabilities, there can be no correlation between the virtual and physical vehicles, thereby losing confidence that virtual testing is representative of what will happen in the real world, he adds.

VSI Labs officials say the Siemens collaboration and the addition of PAVE360 to the ecosystem is important because it substantially enhances the ability to analyze, test, and deploy advanced safety and automated driving systems. “By creating a digital twin of our demonstration vehicle, VSI developers can test applications long before physical deployment, which will save time and reduce development cycles,” notes Phil Magney, VSI Labs founder and president, in a press release.

Check out this video for a quick glimpse of the VSI Labs Capability Demonstrator.

More Siemens Digital Industries Software Coverage

Sponsored Content
Digital Twin Continues to Proliferate Software and Digital Industries
From the ancient Pythagorean Cup to the ultra-modern rocket launchers, all with Simcenter and all in this issue of Engineering Innovation.
Evolve Additive Solutions Partners With Siemens
Technology partnership helps enable optimized and automated AM platform for high-volume production, companies say.
Siemens Closes the Loop on AV Development
SCAPTOR adds a data collection component to the Simcenter portfolio, accelerating the development of autonomous vehicles.
The Modern Face of SPDM
As simulation-driven design becomes a core pillar of digital product development, a refreshed simulation product data management emerges.
Can AI Take Simulation to a New Level?
Vendors explore the impact of machine learning for simulation models and processing.
Siemens Expands Software Ecosystem for Industrial Additive Manufacturing
Working with Sintavia, Morf3D and Evolve Additive solutions can strengthen Siemens’ end-to-end industrial AM solution while expanding support for service providers and AM machine builders, Siemens says.
Siemens Digital Industries Software Company Profile

Share This Article

Subscribe to our FREE magazine, FREE email newsletters or both!

Join over 90,000 engineering professionals who get fresh engineering news as soon as it is published.

About the Author

Beth Stackpole's avatar
Beth Stackpole

Beth Stackpole is a contributing editor to Digital Engineering. Send e-mail about this article to [email protected].

Follow DE