Ford Pilots 3D Printing Initiative for Tooling

The goal is to allow local plant floor workers without 3D printing experience to generate tools, jigs and fixtures using Ultimaker 3D printers.

The goal is to allow local plant floor workers without 3D printing experience to generate tools, jigs and fixtures using Ultimaker 3D printers.

Ford tool designs are sent directly to Ultimaker Cura and printed locally with onsite Ultimaker S5 3D printers. Image Courtesy of Ultimaker.


As part of a wide-scale effort to integrate 3D printing into all avenues of its product development and manufacturing processes, Ford is pursuing a pilot project to jump-start the design of tools and fixtures, including making it easier for plant floor workers to produce components on their own without help from experienced experts.

Ford’s Cologne, Germany, pilot plant maintains a small-scale manufacturing line, which develops cars years before they go into production. As part of their efforts, the team has been honing an optimized workflow to create jigs, tools and fixtures at local plants using 3D printing techniques as opposed to subbing out the components to external partners. Ford has established a dedicated 3D printing workshop at the pilot plant, which allows engineers to iterate custom tool designs to meet their goals of accelerating time to market on key vehicle programs, but also to ensure ergonomic benefits for its workforce.

An Open Approach to 3D Printing Materials

As part of the initiative, Ford’s team has installed Ultimaker 3D printers in the Cologne, Germany, factory, among other European facilities. The Ultimaker printers’ open filament approach enables Ford engineers to take advantage of an array of industrial-grade materials, allowing for greater flexibility in designs, Ford officials say.

“Open filament is very important to us because we can use different filaments from different companies, even use industrial filaments which help us to make very durable tools and fixtures for our high-volume production,” says Raphael Koch, research engineer for Ford R&A Europe. To date, Ford has implemented more than 50 3D-printed tools for high-volume production as part of its Ford Focus vehicle program, an accomplishment that has translated into significant cost savings, Koch says.

Currently, skilled engineers model a tool design in Dassault Systemes CATIA and once it’s refined and validated, it is sent off to local plants, where it is 3D printed to use as part of the production process. Looking ahead, Ford is experimenting with software that will allow untrained plant workers to use the Ultimaker Cura software to create their own tools. The team is also testing use of Trinckle’s Paramate generative design software to simplify the tool design process so non-3D-modeling experts can get onboard.

Ultimaker’s open filament system lets Ford choose from an array of industrial materials for making durable tools and fixtures. Image Courtesy of Ultimaker

Ultimaker’s open filament system lets Ford choose from an array of industrial materials for making durable tools and fixtures. Image Courtesy of Ultimaker.

“Designing and printing a part is something that requires knowledge about 3D printing, CAD and understanding materials properties, and this kind of knowledge is sparse,” says Paul Heiden, senior vice president product management for Ultimaker. In a traditional workflow, plant workers would have to circle back to the skilled design expert to make any changes or adjustments, but the approach that Ford is pursuing would alleviate that need. “Instead of being dependent on someone at the central competency center, workers could do it themselves at a local level,” he explains.

While today, only skilled process engineers are designing the complex fixtures, Ford’s Koch explains the new workflow empower untrained workers to design and create their own tools and fixtures. Ford’s roadmap is to leverage 3D printing workflows to design spare parts, evolve to a design for additive manufacturing approach, and reach the ultimate goal—printing production parts for production vehicles.

More Ultimaker Coverage

Sponsored Content
Insider Q&A: 3D Printing End Use Parts
In this Insider Q&A, the experts at Ultimaker explain how 3D printing can be used for spare parts, jigs and fixtures in a production environment.
UltiMaker Launches MakerBot Sketch Sprint
The new Sketch Sprint delivers enhanced speed, safety, support, and a wealth of resources to ensure 3D printing success and classroom productivity for educators and students.
Introducing Ultimaker Cura 5.8 Beta
Method series users get access to new material profiles.
Audi Sport Boosts Design and Production With Help of Ultimaker
By embracing 3D printing for tools, Audi Sport has slashed costs while reducing lead times, Audi Sports reports.
UltiMaker Releases Updates for Method XL
Enhancements include upgraded features, improved user experience, and new ASA and carbon fiber materials, company reports.
UltiMaker Updates Method XL Firmware
Method XL now supports three new materials—ASA, Nylon 12 Carbon Fiber, and SR-30 support material, the company says.
Ultimaker Company Profile

Share This Article

Subscribe to our FREE magazine, FREE email newsletters or both!

Join over 90,000 engineering professionals who get fresh engineering news as soon as it is published.


About the Author

Beth Stackpole's avatar
Beth Stackpole

Beth Stackpole is a contributing editor to Digital Engineering. Send e-mail about this article to [email protected].

Follow DE
#22690