DE · Topics · Simulate · FEA

Aerospace Supplier Cuts Costs With Nastran FEA Software

Simulated stamping operation cuts weeks of production time.

Simulated stamping operation cuts weeks of production time.

By DE Editors

Design Manufacturing SpA (DEMA), a tier-one aerospace supplier based in Naples, Italy, is using MSC Software’s  Nastran finite element analysis (FEA) software to solve stamping stress concentration and blank size issues prior to building tooling for an aluminum acoustic barrier.

Finite element analysis saved us a considerable amount of money and time by helping to identify and correct these problems before we made a major investment in tooling, said Danilo Malacaria, Structural Engineering Manager for DEMA.

A part of the acoustic barrier is produced in a stamping operation in which a female die applies pressure to a flat aluminum blank, forcing the blank against a male die to form the finished part. Frequently the first stage of tool and blank shows problems such as cracking or excess trim on the formed sheet. Changes are then made to the tooling and the new tooling is tested again to see if the problem was fixed. Its not unusual for six iterations of modifications taking two weeks each to be required to meet the customers quality standards.

Instead, DEMA simulated the stamping operation by using the implicit nonlinear capabilities available in MSC Nastran. The simulation results highlighted two potential problems: the material stress exceeded its failure limits and there was excess material around the perimeter of the finished part. DEMA engineers addressed these problems by changing the model and re-running the simulation until they found a final design that eliminated these problems.

The result was that the die worked perfectly the first time we hit it, Malacaria said. This application demonstrates how we can provide high quality and faster deliveries to our customers by utilizing the latest generation of computer simulation software. There is no way to know for sure exactly how much money and time was saved by not having to re-cut and re-test the die but its clear that the savings were substantial.

For more information, visit MSC Software.

Sources: Press materials received from the company and additional information gleaned from the company’s website.


Share This Article

Subscribe to our FREE magazine, FREE email newsletters or both!

Join over 90,000 engineering professionals who get fresh engineering news as soon as it is published.


About the Author

DE Editors's avatar
DE Editors

DE’s editors contribute news and new product announcements to Digital Engineering.
Press releases may be sent to them via [email protected].

Follow DE
#2382