Rocket Lab Installing Carbon Composite Rocket-Building Machine
The 90-tonne Automated Fiber Placement machine is expected to save about 150,000 manufacturing hours in the Neutron rocket’s production process.
![](https://www.digitalengineering247.com/images/article/spacerockets.jpg)
Rocket Lab’s automated fiber placement machine which will build large composite structures for the Neutron rocket. Image courtesy of Business Wire.
Latest News
August 9, 2024
Rocket Lab USA, Inc., a company involved in launch services and space systems, has begun installation of a large automated fiber placement (AFP) machine into the company’s Neutron rocket production line in Middle River, MD. The AFP machine will enable Rocket Lab to automate production of the large carbon composite rocket structure.
The custom-built 99-ton, 39 ft tall robotic machine, American-made by Electroimpact in Washington, has just completed final acceptance testing with the manufacturer and installation has begun at Rocket Lab’s Space Structures Complex in Middle River,. The new machine will automate the production of all large composite structures of the Neutron launch vehicle including the panels that make up the 91 ft length interstage and fairing, 22.9 ft diameter first stage, and the 16.4 ft diameter second-stage tank.
The autonomous machine can move up to 98 ft in length and lay down continuous carbon fiber composite at a rate of 328 ft per minute. The AFP machine also has a fully automated real-time inspection system that hunts for miniscule defects throughout the laminated carbon composite and alerts the machine operator of any issues before the machine begins laying down the next layer.
As Neutron’s carbon composite structures move into full-scale production, this autonomous machine is expected to introduce time savings of 150,000+ manufacturing hours into the production process.
“We’re combining our proprietary flight-proven carbon composite technology, additive manufacturing, and autonomous robotics to design and build large-scale aerospace components at a pace that will support not only Neutron’s launch cadence, but support Electron and carbon composites structures for our spacecraft customers too,” says Rocket Lab founder and CEO Peter Beck. “We worked closely with our excellent partners at Electroimpact to create this robot and we’re thrilled with the results. It’s an innovative machine producing a next-generation rocket from one of the birthplaces of the aerospace industry in Baltimore, and we can’t wait to see its first carbon composite printed panels come off the production line soon.”
The AFP machine will also be leveraged to print smaller carbon composite Neutron structures, first stages of Rocket Lab’s Electron launch vehicle, and other flight-proven carbon composite structures for space including spacecraft structural panels and assemblies, solar panel substrates, carbon composite tanks and primary structures, and custom projects for the aerospace industry.
Sources: Press materials received from the company and additional information gleaned from the company’s website.
Subscribe to our FREE magazine,
FREE email newsletters or both!Latest News
About the Author
![DE Editors's avatar](https://www.digitalengineering247.com/images/avatars/avatar_16.png)
DE’s editors contribute news and new product announcements to Digital Engineering.
Press releases may be sent to them via [email protected].
![](http://scg-de.s3.amazonaws.com/images/made/images/article/Ansys_Access_350_170_bor1_b9b3be_s_c1.png)
![](http://scg-de.s3.amazonaws.com/images/made/images/article/DesktopMetal_Studio_5_350_170_bor1_b9b3be_s_c1.png)
![](http://scg-de.s3.amazonaws.com/images/made/images/article/Coreform_Nuclear_Product_350_170_bor1_b9b3be_s_c1.png)
![](http://scg-de.s3.amazonaws.com/images/made/images/article/Authentise-image-1_600_350_170_bor1_b9b3be_s_c1.jpg)