Elements of CAM Buyer’s Guide

By DE Editors

Welcome to a special Elements of CAM version of DE’s Buyer’s Guide. Ifyou need to know who provides any sort of analysis software, this iswhere you should start. But for additional information and links tomore sources, make sure you check out the latest version of this guideby clicking here.

The information in this guide was provided by the companies themselves.Data for this print edition of DE’s Buyer’s Guide was taken from theonline version, which is updated continuously. DE’s Buyer’sGuide online lets you perform dynamic searches using multiple criteria andlink right to the company you’re looking for.

DE makes every effort to ensure the accuracy of the data in this guide.However, some vendors may not have completed their information in timefor our deadlines. If that includes your company, see the informationat the bottom of this page.

> To get the most up-to-date version of DE’s Buyer’s Guide, click here.—DE Staff

Capture 3D Inc.

Cline Labs, Inc.

CNC Software

Conceptual Reality LLC

Consolidated Casting Corp.

Delft Spline Systems

eBay, Inc.

ESPRIT by DP Technology Corp.
1150 Avenida Acaso  Camarillo, CA 93012
P: 805.388.6000; F: 805.388.3085

> ESPRIT is a high-performance computer-aided manufacturing (CAM)system for a full range of machine tool applications. ESPRIT deliverspowerful full-spectrum programming for 2-5 axis milling, 2-22 axisturning, 2-5 axis wire EDM, multitasking mill-turn machining, andB-axis machine tools.

Flexsim Software Products

Geometrix, Inc.

Gibbs and Associates
323 Science Drive  Moorpark, CA 93012
P: 800.654.9399; F: 805.523.0006

> GibbsCAM, the computer-aided manufacturing market’s ease-of-useleader, is a powerful product line for programming the complete rangeof machine tools, including 2-5 axis milling, turning, mill/turn,wire-EDM, and multi-task machining.

Global Shop Solutions

ICAM Technologies

IMS Software, Inc.
200 Broadway  Haverhill, MA 01832
P: 978.556.0077; F: 978.556.0171

> IMSpost—The CNC postprocessing software for any CAM system, anycontroller, any machine. IMSverify 2006 provides true solids-based CNCtoolpath verification and machine simulation. Verify the actual G-codethat will run on your machine, not just the CAM toolpath or APT file.Accurately represent tools, holders, fixtures, or the entire machine.Compare the cut solid model with your CAD design data, edit and verifythe G-code simultaneously, and more. Call or e-mail today!

Invensys Systems, Inc. / SimSci-Esscor

ipd

Lawson Software

MachineWorks

Materialise Software

Moldplus, SA

Motorsoft, Inc.

Pathtrace Systems Inc.

Predator Software, Inc.

ShapeGrabber Inc.

Steintek GmbH

Universal Laser Systems, Inc.

AccuMetria

Advance Motion Engineering, Inc.

ANZA, Inc.

BobCAD-CAD

Bricsnet USA

Brooks Automation

CADCAM-E.COM, Inc.

Camnetics, Inc.

CamSoft Corp.

Camstar Systems, Inc.

Camtek

Cimatron Technologies, Inc.

CNC Software

Conceptual Reality LLC

Delcam
Talbot Way  Small Business Health Park
Birmingham B10 OHJ, United Kingdom
P: 800.664.3506; F: 519.874.8170

> Delcam is a provider of CAD/CAM Solutions for complete automatedproduct development from conceptual design to manufacturer andinspection of finished part.

DELMIA
900 N. Squirrel Rd, Suite 100  Auburn Hills, MI 48326
P: 800.382.3199; F: 248.267.8585

> Engineering Lean Digital Manufacturing with DELMIA:
Dassault Systèmes’ DELMIA software suite is the key enabler in aPLM-enabled environment for manufacturing. As the digital manufacturingbrand of Dassault Systèmes’ V5 PLM portfolio, with CATIA, SIMULIA, andENOVIA, DELMIA delivers a digital manufacturing process environment tooptimize production systems before moving to physical implementation,at the convenience of a desktop.

DSM Somos

ESPRIT by DP Technology Corp.
1150 Avenida Acaso  Camarillo, CA 93012
P: 805.388.6000; F: 805.388.3085

> ESPRIT is a high-performance computer-aided manufacturing (CAM)system for a full range of machine tool applications. ESPRIT deliverspowerful full-spectrum programming for 2-5 axis milling, 2-22 axisturning, 2-5 axis wire EDM, multitasking mill-turn machining, andB-axis machine tools.

Exact Software

EZCAM Solutions

FARO Technologies, Inc.

FastCAM Pty. Ltd.

FeatureCAM—Delcam USA
275 E. South Temple, Suite 305  Salt Lake City, UT 84111
P: 888.393.6455; F: 801.575.5017

>FeatureCAM software combines cutting edge technology with renowned easeof use. With its first release in 1995, FeatureCAM introducedfeature-based technology. Since then, FeatureCAM has added automaticfeature recognition, knowledge-based machining and several importingand customization options. Corporations currently using FeatureCAMinclude 3COM, Allied Signal, Boeing, General Motors and Ford.

FlashCut CNC

Forecast Prototype Development

Geometric Software Solutions

Gibbs and Associates
323 Science Drive  Moorpark, CA 93012
P: 800.654.9399; F: 805.523.0006

> GibbsCAM, the computer-aided manufacturing market’s ease-of-useleader, is a powerful product line for programming the complete rangeof machine tools, including 2-5 axis milling, turning, mill/turn,wire-EDM, and multi-task machining.

Griffo Brothers Inc.

Ground Support

Hitachi Zosen Systems International

ICAM Technologies

IMS Software, Inc.
200 Broadway  Haverhill, MA 01832
P: 978.556.0077; F: 978.556.0171

> IMSpost—The CNC postprocessing software for any CAM system, anycontroller, any machine. IMSverify 2006 provides true solids-based CNCtoolpath verification and machine simulation. Verify the actual G-codethat will run on your machine, not just the CAM toolpath or APT file.Accurately represent tools, holders, fixtures, or the entire machine.Compare the cut solid model with your CAD design data, edit and verifythe G-code simultaneously, and more. Call or e-mail today!

IMSI

IntegrityWare

Javelin Technologies

Kubotek USA, Inc.
100 Locke Drive  Marlborough, MA 01752
P: 800.372.3872; F: 508.229.2121

> Kubotek USA delivers today’s most cost-effective CAD/CAM solutionsfor companies and professionals who need freedom to design andadaptability to manufacture. Our customers claim Kubotek technologyprovides the competitive edge to win new business and bring innovativeproducts to market faster in rapidly changing global markets.

Lantek Systems, Inc.

MachineWorks

Manusoft Technologies

Materialise Software

MAXNC Inc.

MCS

MecSoft Corp.

Met-L-Flo Inc.

Metalsoft Inc.

NeST Technologies

NestONE Solutions

OneCNC LLC

Open Mind Technologies USA, Inc.

Opto 22

Pathtrace Systems Inc.

Predator Software, Inc.

Quickparts

Rapid Output

Roland ASD

Router Solutions

Sescoi USA, Inc.

ShipConstructor Software Inc.

Siamanto

SmartCAMcnc

Softcover International Ltd.

SofTech, Inc.

Softelec

Solid Modeling Solutions

SolidCAM

SolidCAM USA Distributor

SolidProfessor Inc.

Solidscape, Inc.

Soligen Technologies Inc.

Solutionware Corp.

Spatial Corp.

STEP Tools, Inc.

Surfware Inc.

Tebis America Inc.

Tecnomatix Unicam, Inc.

TekSoft

Tools4Cam LLC

UGS Corp.

Verisurf Software, Inc.

Vero International Inc.

VX Corporation
2350 Commerce Park, Dr. NE #4  Palm Bay, FL 32905
P: 321.676.3222; F: 321.676.2181

> VX extends enterprise-level mechanical design and manufacturingcapabilities to the desktop-at a fraction of the cost of comparablesystems. VX’s fully-integrated CAD/CAM environment provides theintuitive user interface, advanced three-dimensional modeling and open,powerful engine needed to rapidly develop high-quality products.

WiCAM USA

X-Tremetool Company

To be included in the next DE Buyers’ Guide, contact Jeanne DuVal at 603.563.1631, ext. 274 or click here.