America Makes Announces IMPACT Project Call

The project call is to demonstrate productivity and yield benefits for casting and forging manufacturing via additive manufacturing (AM) technologies, according to America Makes.

The project call is to demonstrate productivity and yield benefits for casting and forging manufacturing via additive manufacturing (AM) technologies, according to America Makes.

The National Center for Defense Manufacturing and Machining (NCDMM) and America Makes have announced a new directed project call funded by the Office of the Under Secretary of Defense, Research and Engineering Manufacturing Technology Office (OSD (R&E)), and the Air Force Research Laboratory (AFRL) worth a total of $11.7M.

 

The objective of the “Improvements in Manufacturing Productivity via Additive Capabilities and Techno-Economic Analysis (IMPACT)” project call is to demonstrate productivity and yield benefits for casting and forging manufacturing via additive manufacturing (AM) technologies, execute techno-economic analysis for metal powder AM, and to bridge component sourcing gaps with AM parts for casting and forging applications. The project call is also seeking isolutions for robotic AM process planning for continuous fiber-reinforced composite structures. 

“This project call addresses the needs of a broad cross-section of our nation’s supply chain including the casting and forging supply chain,” says Brandon Ribic, Ph.D., America Makes technology director. “We are thrilled for the opportunity to deliver longer-term strategic investments to scaling AM technologies.”

The proposed projects should be applicable to Technology Readiness Level (TRL) 4-7 and Manufacturing Readiness Level (MRL) 4-7 at the onset of the proposed project. The request for proposal (RFP) includes 10 topic areas of focus. The number of anticipated awards and maximum funding will vary depending on the topic area being addressed.

  • Demonstrating Lead Time, Productivity, and Yield Improvements for Casting and Forging Manufacturing Operations Using Additive Manufacturing Technologies. Topic Area 1: Develop/disseminate leading practices and accelerate adoption of 3D-printed molds/cores for sand castings; Topic Area 2: Mature AM ceramic technology and promote adoption for rapid, low-volume production of investment castings for defense applications; Topic Area 3: Develop and disseminate tools/frameworks to improve die (die casting) life with AM-printed cooling channels; Topic Area 4: Mature and promote methods to add high wear layers and complex geometric features to forgings; Topic Area 5: Pilot the industrialization of AM preforms to expedite the forging process for low-volume forged components; Topic Area 6: Develop and disseminate leading DED and cold spray practices to promote the adoption of die repair for forging applications; Topic Area 7: AM for casting and forging innovations relevant to DoD acquisition or sustainment programs. 
  • Disseminating the Value Proposition of Bridging Component Sourcing Gaps with AM Parts for Critical Casting and Forging Production.Topic Area 8: Techno-economic analysis and manufacturing readiness assessments to address bridging component sourcing gaps with AM parts for casting and forging production. 

  • Identifying and Disseminating the Impact of Strategic R&D to Scale Powder Bed AM Technology. Topic Area 9: Powder AM techno-economic analysis. 

  • Advancing AM Processing for Continuous Fiber Reinforced Composites. Topic Area 10: Innovations in robotic additive manufacturing process planning. 

For full details and guidelines, click here.

Sources: Press materials received from the company and additional information gleaned from the company’s website.

More America Makes Coverage

Sponsored Content
Additive Manufacturing/3DP Information Alignment
Growing the number of additive manufacturing information assets within the America Makes digital storefront.
America Makes to Host 12th Annual MMX in Youngstown
The event is designed for professionals in government and military, academia, and the additive manufacturing (AM) industry to network, plan, and exchange ideas.
America Makes Offers TRX in Conjunction with RAPID + TCT
America Makes says projects will help drive innovation and expand the industry's applications across various sectors.
America Makes’ Project Call Is Worth $2.1M in Funding
Proposers for the project call are advised to reference the request for proposal for full details.
Dyndrite Awarded for LPBF Qualification
Efforts to bring documented improvements to metal 3D printing operational qualification.
America Makes Winners of Open Project Call Announced
Awardees have identified the current, emerging, and future state of AM process qualification, prioritizing AM machine qualification.
America Makes Company Profile

Share This Article

Subscribe to our FREE magazine, FREE email newsletters or both!

Join over 90,000 engineering professionals who get fresh engineering news as soon as it is published.


About the Author

DE Editors's avatar
DE Editors

DE’s editors contribute news and new product announcements to Digital Engineering.
Press releases may be sent to them via [email protected].

Follow DE
#27769